Commit 9172ee40 authored by Lorenzo "Palinuro" Faletra's avatar Lorenzo "Palinuro" Faletra
Browse files

Import Upstream version 5.15.5

parent f4157cb5
Pipeline #5008 failed with stages
......@@ -33,6 +33,8 @@ Al Viro <viro@zenIV.linux.org.uk>
Andi Kleen <ak@linux.intel.com> <ak@suse.de>
Andi Shyti <andi@etezian.org> <andi.shyti@samsung.com>
Andreas Herrmann <aherrman@de.ibm.com>
Andrej Shadura <andrew.shadura@collabora.co.uk>
Andrej Shadura <andrew@shadura.me> <andrew@beldisplaytech.com>
Andrew Morton <akpm@linux-foundation.org>
Andrew Murray <amurray@thegoodpenguin.co.uk> <amurray@embedded-bits.co.uk>
Andrew Murray <amurray@thegoodpenguin.co.uk> <andrew.murray@arm.com>
......@@ -229,6 +231,7 @@ Matthew Wilcox <willy@infradead.org> <mawilcox@microsoft.com>
Matthew Wilcox <willy@infradead.org> <willy@debian.org>
Matthew Wilcox <willy@infradead.org> <willy@linux.intel.com>
Matthew Wilcox <willy@infradead.org> <willy@parisc-linux.org>
Matthias Fuchs <socketcan@esd.eu> <matthias.fuchs@esd.eu>
Matthieu CASTET <castet.matthieu@free.fr>
Matt Ranostay <matt.ranostay@konsulko.com> <matt@ranostay.consulting>
Matt Ranostay <mranostay@gmail.com> Matthew Ranostay <mranostay@embeddedalley.com>
......@@ -341,6 +344,7 @@ Sumit Semwal <sumit.semwal@ti.com>
Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Tejun Heo <htejun@gmail.com>
Thomas Graf <tgraf@suug.ch>
Thomas Körper <socketcan@esd.eu> <thomas.koerper@esd.eu>
Thomas Pedersen <twp@codeaurora.org>
Tiezhu Yang <yangtiezhu@loongson.cn> <kernelpatch@126.com>
Todor Tomov <todor.too@gmail.com> <todor.tomov@linaro.org>
......
......@@ -971,6 +971,7 @@ D: PowerPC
N: Daniel Drake
E: dsd@gentoo.org
D: USBAT02 CompactFlash support in usb-storage
D: ZD1211RW wireless driver
S: UK
N: Oleg Drokin
......
......@@ -128,6 +128,8 @@ Date: Aug 28, 2020
KernelVersion: 5.10.0
Contact: dmaengine@vger.kernel.org
Description: The last executed device administrative command's status/error.
Also last configuration error overloaded.
Writing to it will clear the status.
What: /sys/bus/dsa/devices/wq<m>.<n>/block_on_fault
Date: Oct 27, 2020
......@@ -211,6 +213,13 @@ Contact: dmaengine@vger.kernel.org
Description: Indicate whether ATS disable is turned on for the workqueue.
0 indicates ATS is on, and 1 indicates ATS is off for the workqueue.
What: /sys/bus/dsa/devices/wq<m>.<n>/occupancy
Date May 25, 2021
KernelVersion: 5.14.0
Contact: dmaengine@vger.kernel.org
Description: Show the current number of entries in this WQ if WQ Occupancy
Support bit WQ capabilities is 1.
What: /sys/bus/dsa/devices/engine<m>.<n>/group_id
Date: Oct 25, 2019
KernelVersion: 5.6.0
......
......@@ -8,9 +8,19 @@ Description:
c_chmask capture channel mask
c_srate capture sampling rate
c_ssize capture sample size (bytes)
c_mute_present capture mute control enable
c_volume_present capture volume control enable
c_volume_min capture volume control min value (in 1/256 dB)
c_volume_max capture volume control max value (in 1/256 dB)
c_volume_res capture volume control resolution (in 1/256 dB)
p_chmask playback channel mask
p_srate playback sampling rate
p_ssize playback sample size (bytes)
p_mute_present playback mute control enable
p_volume_present playback volume control enable
p_volume_min playback volume control min value (in 1/256 dB)
p_volume_max playback volume control max value (in 1/256 dB)
p_volume_res playback volume control resolution (in 1/256 dB)
req_number the number of pre-allocated request
for both capture and playback
========== ===================================
......@@ -9,8 +9,18 @@ Description:
c_srate capture sampling rate
c_ssize capture sample size (bytes)
c_sync capture synchronization type (async/adaptive)
c_mute_present capture mute control enable
c_volume_present capture volume control enable
c_volume_min capture volume control min value (in 1/256 dB)
c_volume_max capture volume control max value (in 1/256 dB)
c_volume_res capture volume control resolution (in 1/256 dB)
fb_max maximum extra bandwidth in async mode
p_chmask playback channel mask
p_srate playback sampling rate
p_ssize playback sample size (bytes)
p_mute_present playback mute control enable
p_volume_present playback volume control enable
p_volume_min playback volume control min value (in 1/256 dB)
p_volume_max playback volume control max value (in 1/256 dB)
p_volume_res playback volume control resolution (in 1/256 dB)
========= ============================
......@@ -215,6 +215,17 @@ Description: Sets the skip reset on timeout option for the device. Value of
"0" means device will be reset in case some CS has timed out,
otherwise it will not be reset.
What: /sys/kernel/debug/habanalabs/hl<n>/state_dump
Date: Oct 2021
KernelVersion: 5.15
Contact: ynudelman@habana.ai
Description: Gets the state dump occurring on a CS timeout or failure.
State dump is used for debug and is created each time in case of
a problem in a CS execution, before reset.
Reading from the node returns the newest state dump available.
Writing an integer X discards X state dumps, so that the
next read would return X+1-st newest state dump.
What: /sys/kernel/debug/habanalabs/hl<n>/stop_on_err
Date: Mar 2020
KernelVersion: 5.6
......@@ -230,6 +241,14 @@ Description: Displays a list with information about the currently user
pointers (user virtual addresses) that are pinned and mapped
to DMA addresses
What: /sys/kernel/debug/habanalabs/hl<n>/userptr_lookup
Date: Aug 2021
KernelVersion: 5.15
Contact: ogabbay@kernel.org
Description: Allows to search for specific user pointers (user virtual
addresses) that are pinned and mapped to DMA addresses, and see
their resolution to the specific dma address.
What: /sys/kernel/debug/habanalabs/hl<n>/vm
Date: Jan 2019
KernelVersion: 5.1
......
What: /dev/wmi/dell-smbios
Date: November 2017
KernelVersion: 4.15
Contact: "Mario Limonciello" <mario.limonciello@dell.com>
Contact: Dell.Client.Kernel@dell.com
Description:
Perform SMBIOS calls on supported Dell machines.
through the Dell ACPI-WMI interface.
......
......@@ -27,12 +27,13 @@ Description:
lsm: [[subj_user=] [subj_role=] [subj_type=]
[obj_user=] [obj_role=] [obj_type=]]
option: [[appraise_type=]] [template=] [permit_directio]
[appraise_flag=] [keyrings=]
[appraise_flag=] [appraise_algos=] [keyrings=]
base:
func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK][MODULE_CHECK]
[FIRMWARE_CHECK]
[FIRMWARE_CHECK]
[KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK]
[KEXEC_CMDLINE] [KEY_CHECK] [CRITICAL_DATA]
[SETXATTR_CHECK]
mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND]
[[^]MAY_EXEC]
fsmagic:= hex value
......@@ -55,6 +56,10 @@ Description:
label:= [selinux]|[kernel_info]|[data_label]
data_label:= a unique string used for grouping and limiting critical data.
For example, "selinux" to measure critical data for SELinux.
appraise_algos:= comma-separated list of hash algorithms
For example, "sha256,sha512" to only accept to appraise
files where the security.ima xattr was hashed with one
of these two algorithms.
default policy:
# PROC_SUPER_MAGIC
......@@ -134,3 +139,9 @@ Description:
keys added to .builtin_trusted_keys or .ima keyring:
measure func=KEY_CHECK keyrings=.builtin_trusted_keys|.ima
Example of the special SETXATTR_CHECK appraise rule, that
restricts the hash algorithms allowed when writing to the
security.ima xattr of a file:
appraise func=SETXATTR_CHECK appraise_algos=sha256,sha384,sha512
......@@ -28,6 +28,18 @@ Description:
For more details refer Documentation/admin-guide/iostats.rst
What: /sys/block/<disk>/diskseq
Date: February 2021
Contact: Matteo Croce <mcroce@microsoft.com>
Description:
The /sys/block/<disk>/diskseq files reports the disk
sequence number, which is a monotonically increasing
number assigned to every drive.
Some devices, like the loop device, refresh such number
every time the backing file is changed.
The value type is 64 bit unsigned.
What: /sys/block/<disk>/<part>/stat
Date: February 2008
Contact: Jerome Marchand <jmarchan@redhat.com>
......
......@@ -55,6 +55,43 @@ Date: Oct, 2016
KernelVersion: v4.10
Contact: linux-ide@vger.kernel.org
Description:
(RW) Write to the file to turn on or off the SATA ncq (native
command queueing) support. By default this feature is turned
off.
(RW) Write to the file to turn on or off the SATA NCQ (native
command queueing) priority support. By default this feature is
turned off. If the device does not support the SATA NCQ
priority feature, writing "1" to this file results in an error
(see ncq_prio_supported).
What: /sys/block/*/device/sas_ncq_prio_enable
Date: Oct, 2016
KernelVersion: v4.10
Contact: linux-ide@vger.kernel.org
Description:
(RW) This is the equivalent of the ncq_prio_enable attribute
file for SATA devices connected to a SAS host-bus-adapter
(HBA) implementing support for the SATA NCQ priority feature.
This file does not exist if the HBA driver does not implement
support for the SATA NCQ priority feature, regardless of the
device support for this feature (see sas_ncq_prio_supported).
What: /sys/block/*/device/ncq_prio_supported
Date: Aug, 2021
KernelVersion: v5.15
Contact: linux-ide@vger.kernel.org
Description:
(RO) Indicates if the device supports the SATA NCQ (native
command queueing) priority feature.
What: /sys/block/*/device/sas_ncq_prio_supported
Date: Aug, 2021
KernelVersion: v5.15
Contact: linux-ide@vger.kernel.org
Description:
(RO) This is the equivalent of the ncq_prio_supported attribute
file for SATA devices connected to a SAS host-bus-adapter
(HBA) implementing support for the SATA NCQ priority feature.
This file does not exist if the HBA driver does not implement
support for the SATA NCQ priority feature, regardless of the
device support for this feature.
What: /sys/bus/event_source/devices/uncore_*/alias
Date: June 2021
KernelVersion: 5.15
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description: Read-only. An attribute to describe the alias name of
the uncore PMU if an alias exists on some platforms.
The 'perf(1)' tool should treat both names the same.
They both can be used to access the uncore PMU.
Example:
$ cat /sys/devices/uncore_cha_2/alias
uncore_type_0_2
What: /sys/bus/iio/devices/iio:deviceX/out_temp_raw
Date: August 2021
KernelVersion: 5.15
Contact: Andreas Klinger <ak@it-klinger.de>
Description:
Set the temperature. This value is sent to the sensor for
temperature compensation.
Default value: 25000 (25 °C)
What: /sys/bus/iio/devices/iio:deviceX/out_humidityrelative_raw
Date: August 2021
KernelVersion: 5.15
Contact: Andreas Klinger <ak@it-klinger.de>
Description:
Set the relative humidity. This value is sent to the sensor for
humidity compensation.
Default value: 50000 (50 % relative humidity)
What: /sys/bus/iio/devices/iio:deviceX/in_resistance_calibbias
Date: August 2021
KernelVersion: 5.15
Contact: Andreas Klinger <ak@it-klinger.de>
Description:
Set the bias value for the resistance which is used for
calculation of in_concentration_input as follows:
x = (in_resistance_raw - in_resistance_calibbias) * 0.65
in_concentration_input = 500 / (1 + e^x)
Default value: 30000
......@@ -121,6 +121,23 @@ Description:
child buses, and re-discover devices removed earlier
from this part of the device tree.
What: /sys/bus/pci/devices/.../reset_method
Date: August 2021
Contact: Amey Narkhede <ameynarkhede03@gmail.com>
Description:
Some devices allow an individual function to be reset
without affecting other functions in the same slot.
For devices that have this support, a file named
reset_method is present in sysfs. Reading this file
gives names of the supported and enabled reset methods and
their ordering. Writing a space-separated list of names of
reset methods sets the reset methods and ordering to be
used when resetting the device. Writing an empty string
disables the ability to reset the device. Writing
"default" enables all supported reset methods in the
default ordering.
What: /sys/bus/pci/devices/.../reset
Date: July 2009
Contact: Michael S. Tsirkin <mst@redhat.com>
......
......@@ -28,3 +28,17 @@ Description:
value comes from an ACPI _PXM method or a similar firmware
source. Initial users for this file would be devices like
arm smmu which are populated by arm64 acpi_iort.
What: /sys/bus/platform/devices/.../msi_irqs/
Date: August 2021
Contact: Barry Song <song.bao.hua@hisilicon.com>
Description:
The /sys/devices/.../msi_irqs directory contains a variable set
of files, with each file being named after a corresponding msi
irq vector allocated to that device.
What: /sys/bus/platform/devices/.../msi_irqs/<N>
Date: August 2021
Contact: Barry Song <song.bao.hua@hisilicon.com>
Description:
This attribute will show "msi" if <N> is a valid msi irq
......@@ -232,7 +232,7 @@ Description: When new NVM image is written to the non-active NVM
What: /sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect
Date: Oct 2020
KernelVersion: v5.9
Contact: Mario Limonciello <mario.limonciello@dell.com>
Contact: Mario Limonciello <mario.limonciello@outlook.com>
Description: For supported devices, automatically authenticate the new Thunderbolt
image when the device is disconnected from the host system.
......
......@@ -2,8 +2,8 @@ What: /sys/class/firmware-attributes/*/attributes/*/
Date: February 2021
KernelVersion: 5.11
Contact: Divya Bharathi <Divya.Bharathi@Dell.com>,
Mario Limonciello <mario.limonciello@dell.com>,
Prasanth KSR <prasanth.ksr@dell.com>
Dell.Client.Kernel@dell.com
Description:
A sysfs interface for systems management software to enable
configuration capability on supported systems. This directory
......@@ -130,8 +130,8 @@ What: /sys/class/firmware-attributes/*/authentication/
Date: February 2021
KernelVersion: 5.11
Contact: Divya Bharathi <Divya.Bharathi@Dell.com>,
Mario Limonciello <mario.limonciello@dell.com>,
Prasanth KSR <prasanth.ksr@dell.com>
Dell.Client.Kernel@dell.com
Description:
Devices support various authentication mechanisms which can be exposed
as a separate configuration object.
......@@ -220,8 +220,8 @@ What: /sys/class/firmware-attributes/*/attributes/pending_reboot
Date: February 2021
KernelVersion: 5.11
Contact: Divya Bharathi <Divya.Bharathi@Dell.com>,
Mario Limonciello <mario.limonciello@dell.com>,
Prasanth KSR <prasanth.ksr@dell.com>
Dell.Client.Kernel@dell.com
Description:
A read-only attribute reads 1 if a reboot is necessary to apply
pending BIOS attribute changes. Also, an uevent_KOBJ_CHANGE is
......@@ -249,8 +249,8 @@ What: /sys/class/firmware-attributes/*/attributes/reset_bios
Date: February 2021
KernelVersion: 5.11
Contact: Divya Bharathi <Divya.Bharathi@Dell.com>,
Mario Limonciello <mario.limonciello@dell.com>,
Prasanth KSR <prasanth.ksr@dell.com>
Dell.Client.Kernel@dell.com
Description:
This attribute can be used to reset the BIOS Configuration.
Specifically, it tells which type of reset BIOS configuration is being
......@@ -272,3 +272,14 @@ Description:
Note that any changes to this attribute requires a reboot
for changes to take effect.
What: /sys/class/firmware-attributes/*/attributes/debug_cmd
Date: July 2021
KernelVersion: 5.14
Contact: Mark Pearson <markpearson@lenovo.com>
Description:
This write only attribute can be used to send debug commands to the BIOS.
This should only be used when recommended by the BIOS vendor. Vendors may
use it to enable extra debug attributes or BIOS features for testing purposes.
Note that any changes to this attribute requires a reboot for changes to take effect.
......@@ -494,6 +494,15 @@ Description: AArch64 CPU registers
'identification' directory exposes the CPU ID registers for
identifying model and revision of the CPU.
What: /sys/devices/system/cpu/aarch32_el0
Date: May 2021
Contact: Linux ARM Kernel Mailing list <linux-arm-kernel@lists.infradead.org>
Description: Identifies the subset of CPUs in the system that can execute
AArch32 (32-bit ARM) applications. If present, the same format as
/sys/devices/system/cpu/{offline,online,possible,present} is used.
If absent, then all or none of the CPUs can execute AArch32
applications and execve() will behave accordingly.
What: /sys/devices/system/cpu/cpu#/cpu_capacity
Date: December 2016
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
......@@ -640,3 +649,20 @@ Description: SPURR ticks for cpuX when it was idle.
This sysfs interface exposes the number of SPURR ticks
for cpuX when it was idle.
What: /sys/devices/system/cpu/cpuX/mte_tcf_preferred
Date: July 2021
Contact: Linux ARM Kernel Mailing list <linux-arm-kernel@lists.infradead.org>
Description: Preferred MTE tag checking mode
When a user program specifies more than one MTE tag checking
mode, this sysfs node is used to specify which mode should
be preferred when scheduling a task on that CPU. Possible
values:
================ ==============================================
"sync" Prefer synchronous mode
"async" Prefer asynchronous mode
================ ==============================================
See also: Documentation/arm64/memory-tagging-extension.rst
What: /sys/bus/spi/<dev>/update_firmware
Date: Jul 2021
Contact: sebastian.reichel@collabora.com
Description: Write 1 to this file to update the ACHC microcontroller
firmware via the EzPort interface. For this the kernel
will load "achc.bin" via the firmware API (so usually
from /lib/firmware). The write will block until the FW
has either been flashed successfully or an error occured.
What: /sys/bus/spi/<dev>/reset
Date: Jul 2021
Contact: sebastian.reichel@collabora.com
Description: This file represents the microcontroller's reset line.
1 means the reset line is asserted, 0 means it's not
asserted. The file is read and writable.
What: /sys/bus/platform/devices/INTC1092:00/intc_reg
Date: August 2021
KernelVersion: 5.15
Contact: Shravan S <s.shravan@intel.com>,
An Sudhakar <sudhakar.an@intel.com>
Description:
Specific Absorption Rate (SAR) regulatory mode is typically
derived based on information like mcc (Mobile Country Code) and
mnc (Mobile Network Code) that is available for the currently
attached LTE network. A userspace application is required to set
the current SAR regulatory mode on the Dynamic SAR driver using
this sysfs node. Such an application can also read back using
this sysfs node, the currently configured regulatory mode value
from the Dynamic SAR driver.
Acceptable regulatory modes are:
== ====
0 FCC
1 CE
2 ISED
== ====
- The regulatory mode value has one of the above values.
- The default regulatory mode used in the driver is 0.
What: /sys/bus/platform/devices/INTC1092:00/intc_data
Date: August 2021
KernelVersion: 5.15
Contact: Shravan S <s.shravan@intel.com>,
An Sudhakar <sudhakar.an@intel.com>
Description:
This sysfs entry is used to retrieve Dynamic SAR information
emitted/maintained by a BIOS that supports Dynamic SAR.
The retrieved information is in the order given below:
- device_mode
- bandtable_index
- antennatable_index
- sartable_index
The above information is sent as integer values separated
by a single space. This information can then be pushed to a
WWAN modem that uses this to control the transmit signal
level using the Band/Antenna/SAR table index information.
These parameters are derived/decided by aggregating
device-mode like laptop/tablet/clamshell etc. and the
proximity-sensor data available to the embedded controller on
given host. The regulatory mode configured on Dynamic SAR
driver also influences these values.
The userspace applications can poll for changes to this file
using POLLPRI event on file-descriptor (fd) obtained by opening
this sysfs entry. Application can then read this information from
the sysfs node and consume the given information.
......@@ -1298,3 +1298,239 @@ Description: This node is used to set or display whether UFS WriteBooster is
(if the platform supports UFSHCD_CAP_CLK_SCALING). For a
platform that doesn't support UFSHCD_CAP_CLK_SCALING, we can
disable/enable WriteBooster through this sysfs node.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/hpb_version
Date: June 2021
Contact: Daejun Park <daejun7.park@samsung.com>
Description: This entry shows the HPB specification version.
The full information about the descriptor can be found in the UFS
HPB (Host Performance Booster) Extension specifications.
Example: version 1.2.3 = 0123h
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/hpb_control
Date: June 2021
Contact: Daejun Park <daejun7.park@samsung.com>
Description: This entry shows an indication of the HPB control mode.
00h: Host control mode
01h: Device control mode
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/hpb_region_size
Date: June 2021
Contact: Daejun Park <daejun7.park@samsung.com>
Description: This entry shows the bHPBRegionSize which can be calculated
as in the following (in bytes):
HPB Region size = 512B * 2^bHPBRegionSize
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/hpb_number_lu
Date: June 2021
Contact: Daejun Park <daejun7.park@samsung.com>
Description: This entry shows the maximum number of HPB LU supported by
the device.
00h: HPB is not supported by the device.
01h ~ 20h: Maximum number of HPB LU supported by the device
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/hpb_subregion_size
Date: June 2021
Contact: Daejun Park <daejun7.park@samsung.com>
Description: This entry shows the bHPBSubRegionSize, which can be
calculated as in the following (in bytes) and shall be a multiple of
logical block size:
HPB Sub-Region size = 512B x 2^bHPBSubRegionSize
bHPBSubRegionSize shall not exceed bHPBRegionSize.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/hpb_max_active_regions
Date: June 2021
Contact: Daejun Park <daejun7.park@samsung.com>
Description: This entry shows the maximum number of active HPB regions that
is supported by the device.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/hpb_lu_max_active_regions
Date: June 2021
Contact: Daejun Park <daejun7.park@samsung.com>
Description: This entry shows the maximum number of HPB regions assigned to
the HPB logical unit.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/hpb_pinned_region_start_offset
Date: June 2021
Contact: Daejun Park <daejun7.park@samsung.com>
Description: This entry shows the start offset of HPB pinned region.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/hpb_number_pinned_regions
Date: June 2021
Contact: Daejun Park <daejun7.park@samsung.com>
Description: This entry shows the number of HPB pinned regions assigned to
the HPB logical unit.
The file is read only.
What: /sys/class/scsi_device/*/device/hpb_stats/hit_cnt
Date: June 2021
Contact: Daejun Park <daejun7.park@samsung.com>
Description: This entry shows the number of reads that changed to HPB read.
The file is read only.
What: /sys/class/scsi_device/*/device/hpb_stats/miss_cnt
Date: June 2021
Contact: Daejun Park <daejun7.park@samsung.com>
Description: This entry shows the number of reads that cannot be changed to
HPB read.
The file is read only.
What: /sys/class/scsi_device/*/device/hpb_stats/rb_noti_cnt
Date: June 2021
Contact: Daejun Park <daejun7.park@samsung.com>
Description: This entry shows the number of response UPIUs that has
recommendations for activating sub-regions and/or inactivating region.
The file is read only.
What: /sys/class/scsi_device/*/device/hpb_stats/rb_active_cnt
Date: June 2021
Contact: Daejun Park <daejun7.park@samsung.com>
Description: This entry shows the number of active sub-regions recommended by
response UPIUs.
The file is read only.